FILM HOOK SPONGE HOLDER SUS-1P

Spec/Size

Product Code	250898828500
Color	SILVER
Size	W8 x D5.5 x H7.4cm
Materials	STAINLESS STEEL,POLYCARBONATE,PVC,POLYURETHANE
Weight	0.05kg
Warranty	-
Assembly Type	Assembled
Assembly Time	-
Delivery Type	DropOffDelivery
Package Size	W8.5 x D5 x H11.5cm
Package Weight	0.07kg
Made In	CHINA

● Can be placed floating and drains well
● Adhesive sheet that can be repeatedly attached and removed

[Size (approx.)]
8 x 5.5 x 7.4 cm

[Material]
Body: Stainless steel
Adhesive sheet, hook: Polycarbonate
Sheet: PVC resin, polyurethane

[Load capacity (approx.)]
0.5 kg

[Heat resistance temperature]
60 ° C

[How to install]
* Before use, please check that the adhesive sheet is not deformed or folded.
1. Wipe off dirt, moisture, oil, etc. from the mounting surface and dry it.
2. Remove the adhesive sheet from the main body and peel off the protective sheet on the adhesive surface of the adhesive sheet.
3. Press the adhesive sheet firmly and rub from the center to the outside to remove air and make it adhere.
4. Insert the main body into the hook from above. Place the storage item after attaching the adhesive sheet for more than 30 minutes.

[About installation locations]
Places where it can be installed:
● Surfaces larger than the adhesive surface of this product
● Flat, shiny surfaces without unevenness (stainless steel, tiles, plastic surfaces, glass, metal painted surfaces such as refrigerators and washing machines, etc.)
* Avoid using on thin glass surfaces.
* Even if the surface is flat, it may not be possible to install depending on the surface treatment, material, condition, and environment. Places

where it cannot be installed:
● Surfaces smaller than the adhesive surface of this product
● Uneven, rough, curved, or non-perpendicular surfaces
● Wallpaper and other cross surfaces
● Surfaces with surface treatments such as fluorine treatment, mold prevention, and stain prevention treatments
● Earthen walls, plaster, sand walls, mortar, concrete, frosted glass, natural marble
● Near fire or places that become hot

[About stainless steel products]
● Stainless steel is less susceptible to rust than iron, but rust may occur depending on the conditions and environment of use.
● Spotted red rust may appear on the surface, but this is a "transfer rust" caused by the adhesion of salt and harmful gases contained in the air.
If rust transfer occurs, soak a soft cloth in a neutral detergent or cleanser, wring it out tightly, wipe it off, then lightly wipe with water and wipe thoroughly with a dry cloth to remove any remaining detergent.

[Care instructions and precautions]
●If the adhesive power of the adhesive sheet decreases, gently wash the adhesive surface with a diluted solution of neutral detergent, rinse with water and let it dry naturally to restore its adhesive power.
● Please note that if you roughly peel off the adhesive sheet or peel it off with excessive force, it may become deformed and you will not be able to use it repeatedly.
●Do not boil either the adhesive sheet or the main body. Also, do not use a dishwasher.
●Do not use thinner, benzene, polishing powder, detergents containing abrasives, scrubbers (nylon, metal, etc.), melamine sponges, or sponges containing abrasives.
●Do not use bleach.

[Handling precautions]
●Do not use for any purpose other than its intended purpose.
●Use on a flat surface.
●Make sure that it is firmly attached before using.
●Store in a well-balanced manner to avoid uneven load distribution.
●Use within the load capacity.
●Please note that even within the load capacity, a large impact may cause the product to fall, resulting in injury or damage.
●Load capacity is an estimate. It varies depending on the material of the surface on which it is installed and the conditions of use.
●Do not use near fire, in high temperature locations, or in direct sunlight.
●If the product is installed in the same location for an extended period of time, the surface on which it is installed may discolor. Remove it regularly.
●When using, be careful not to injure yourself on metal joints, etc.