OIL SPRAY S

Spec/Size

Product Code	4903320049482
Color	OTHER
Size	W5 x D5 x H12.5cm
Materials	acrylic resin,PP
Weight	0.12kg
Warranty	-
Assembly Type	Assembled
Assembly Time	-
Delivery Type	DropOffDelivery
Package Size	W5.5 x D5.5 x H15cm
Package Weight	0.15kg
Made In	CHINA

●Healthy with less oil
●Spray oil evenly and only as needed
●Compact size that fits in a drawer
●Easy to use by placing it on a table
●Pump type that does not use gas
●Economic and environmentally friendly as it can be used repeatedly
●Easy to season and cook

[Features]

●A spray that atomizes edible oils such as salad oil and olive oil.
●By atomizing the oil, you can apply a small amount of oil evenly.*Do not add anything other than oil. Highly viscous oils may not spray well. Also, do not use oil that contains solids, such as oil in which herbs or garlic have been pickled, as this may cause clogging. *It may be difficult to spray oil stored in the refrigerator.
●Pump (pressurized) type that does not use gas; economical and can be used repeatedly. This is an environmentally friendly product.
●The clear bottle has a wide opening that allows you to check the amount of oil in it, making it easy to clean.

[Size (approx.) Diameter 50mm x 125mm

[Raw resin]

●Bottle: Acrylic resin
●Cap: Polypropylene
●Adapter: ABS resin
●Packing (large/small): Silicone rubber
●Pump part: Polypropylene/polyethylene

[Heat/cold resistant temperature]

●Bottle: 70℃/-30℃
●Cap: 120℃/-30℃
●Adapter: 80℃/-30℃
●Packing (large/small): 140℃/-30℃
●Pump part: 60℃/-30℃

[How to use]
*Be sure to check the position of the gasket before use. (Refer to About the packing in the instruction manual) If it is not set correctly, it may cause oil to gush out or prevent spraying. *Please wash thoroughly and dry thoroughly before use. (Refer to the instruction manual Cleaning) ① Remove the adapter by turning it counterclockwise and pour cooking oil up to the MAX mark on the bottle. *Please do not insert more than the scale as you need a space to apply pressure. ② Fit the adapter into the bottle and turn clockwise to tighten firmly. ③ Place the bottle, hold the bottle firmly with one hand, and use the other hand to move the cap up and down. Gently move the cap vertically up and down until it feels heavy. (Approximately 15 to 20 times.) *Excessive pressure may cause damage to the bottle. ④Remove the cap and check the direction of the spray part before spraying. *If the tip of the tube is not soaked in oil when spraying at an angle, you will not be able to spray. Check the position of the tube before spraying. *If the pressure inside the bottle decreases, it will no longer be possible to spray in a mist form. If the spray loses its force, apply pressure again by following step ③. *The spray part will not come down even if you press it with your finger, but this is not a problem as this is the product specification. Apply pressure and you will be able to spray. ⑤ After use, close the cap and loosen the adapter to release any air remaining in the bottle. Please close the adapter tightly when storing. *Please turn the adapter slowly as the remaining oil may spray out.